Industry

Brief analysis on safety and maintenance matters of MTU diesel engine

Today I would like to share with you the safety and maintenance of generators as follows:

1. When operating the engine or adding fuel, smoking is strictly prohibited. Flammable and explosive materials such as fuel, oil and cleaning agent shall not be placed around the engine.

2. When the engine is working, do not loosen any high-pressure oil pipe or gas pipe.

3.If you need to check whether there is fuel leakage, to avoid skin contact with it, causing irreversible damage. Do not touch electrical parts during operation to avoid electric shock.

Notes for engine maintenance:

1. Before starting the engine, it is necessary to check whether the coolant, lubricating oil and fuel are enough.

2. The engine must be started with no load, and the running state and display value of all instruments should be observed frequently during operation. If abnormal, stop measures should be taken immediately.

3, when the coolant temperature is below 60 degrees Celsius, do not overload operation.

4. Do not run the engine without air filter. If the coolant temperature is too hot and must be shut down, do not open the tank cover or inject cold water immediately after the shutdown.

6. When checking the tape tension and other driving devices, the engine should be in the stop state.

Jiangsu Meao Power Technology Co., Ltd. is an important manufacturer of diesel generators. The company mainly manufactures and sells diesel generator sets with power of 3-3000kW, mobile power station of 24-600kW, Marine emergency diesel generator set of 24-800kW, gas generator set, heavy oil generator set and all kinds of imported series, special series (trailer, static speaker, mobile lighthouse, container, etc.) diesel generator At the same time, we are engaged in generator set maintenance and after-sale service of generator set accessories.