First, the power system with strict requirements for power interruption time should use the automatic switching system of mains/generator set. The ATS self-switching control cabinet can automatically switch to the backup power system when the original power supply system fails, so as to maintain normal power supply.
2. If the original supply system is municipal power, when the municipal power fails or the three-phase phase is short or under voltage, the automatic switching system will automatically start the generator set immediately. After the generator set starts running, the voltage and frequency will supply power to the load after normal.
3. If the original supply system is the generator set, when the generator set is shut down in case of failure, the automatic switching system will immediately cut off the power supply of the generator set and automatically switch to the mains power supply. Automatic load output conversion screen (ATS) adopts dual power supply automatic switching device (hereinafter referred to as switching device) as the main device of automatic switching cabinet, suitable for ac 50Hz, rated operating voltage of 400V dual power supply system. The controller integrates multiple functions and is used to control the automatic transfer (ATS) between two power supplies. When the primary source fails, the switch switches to the standby power supply, and when the primary power supply recovers, the switch switches to the primary power supply.
4. The controller is made of fire-retardant, high-strength plastic die-casting panel and dusted steel shell. All the connections of the controller are connected by the terminal with a pin lock, so that the connecting, moving, maintenance, replacement of the equipment is very easy and convenient.
5. The new ATS controller TU series has complete functions and stable performance. Installation, line connection and operation are very convenient. The controller can display various states and electrical parameters of ATS, automatic or manual operation button, ATS (automatic transfer switch) control, realize the automatic conversion of two power supply; And with communication interface (RS485), through the connection of this interface, to achieve the three-remote function. According to different power sources, realize different control functions, this controller TU series has three types, respectively: TU-GG (power generation – power generation), TU-MG (mains power – power generation), TU-MM (mains power – mains power), among which the standard is TU-MG. All controllers are of the same shape and size.
Jiangsu Meao Power Technology Co., Ltd. focuses on the development and manufacture of diesel generator sets, and has accumulated rich experience in manufacturing and service in this field. As a professional generator manufacturer, MEAOPOWER attaches great importance to product development, innovation and service quality, and maintains close strategic cooperation with famous domestic and international enterprises such as Cummins, Perkins, Doosan, Yuchai, Weichai, Shangchai, Wuxi Wandi, Lillesomer, Stanford, Marathon and so on.
