Generator voltage is usually associated with idle time is too long, generally when we use the generator to do a good job of maintenance and heat engine preparation, occasionally start a period of time, so that the generator itself voltage load is more balanced, then the generator set voltage on what other reasons? What should be done? Here is a detailed introduction for you: the motor voltage does not go up, at this time there may be the following situation:
(1) The output power of the generator set decreases and fails to meet the power requirements of the user;
(2) the asymmetric three-phase voltage causes the neutral potential displacement of the generator set;
(3) The neutral current is too large, so that the distribution transformer operation temperature rises, serious will burn the transformer;
(4) make some phase voltage is high, the other phase voltage is reduced;
(5) Burn out the generator, affect the normal power supply, therefore, the use of the generator set must pay attention to, can not be three-phase imbalance, if you can not change its output power, you need to choose to replace the wiring mode, in order to prevent the generator set damage.
After the use of the generator, regular maintenance is very important, and before the use of the heat engine should be prepared, this time the generator set is not damaged, you can quickly respond, if the generator leader time can not start it indicates that the generator has a fault, to timely maintenance.
Jiangsu Meao Power Technology Co., Ltd. is an important manufacturer of diesel generators. The company mainly manufactures and sells diesel generator sets with power of 3-3000kW, mobile power station of 24-600kW, Marine emergency diesel generator set of 24-800kW, gas generator set, heavy oil generator set and all kinds of imported series, special series (trailer, static speaker, mobile lighthouse, container, etc.) diesel generator At the same time, we are engaged in generator set maintenance and after-sale service of generator set accessories.
